Sneak Peak at Cape Charles 32

I started to design the Cape Charles 32 a few years ago, commissioned by a client in Maryland. He passed away without having built the boat and it slid to the back shelf, with other designs having higher priority. There it stayed, waiting for a new client to take it on.

Word did get out about this incomplete design and I occasionally received enquiries about when it would be complete or when they could start building. Somehow there was always too much pressure from other designs on my board. Earlier this year the Cape Charles 32 found a spot on my board and is moving forward again and two will start construction when I have the necessary drawings ready.

In the process it has gone through a metamorphosis, prompted by the change of primary client who helps to steer the direction of the design. Eventually the concept of the original client, of a gaff rigged coastal cruiser with simple traditional layout, will be available alongside the version on which I am now working, as shown here.

Profile and Underbody of the Cape Charles 32

Hull shape and construction is very much as for the smaller sisters in this design range. They are the Cape Cutter 19, the Cape Henry 21 and the Cape May 25. The family is growing.

With a draft of 1.2m (3' 11"), the Cape Charles 32 will be a good boat for thin water cruising. If you do run her aground, you can hop over the side to push her off again. That will get you into private anchorages that are out of bounds to deep keel cruisers.

To see our full range of designs, please visit /.

Related Posts by Categories