One of the most unique aspects of the St. Lawrence River Skiff (SLRS) is its hull shape which we believe derives from the bark canoes, at least partly. Both hull forms feature a very fine entry and exit to the waterlines. However, on nearly all the St. Lawrence River Skiffs, their after sections are finer than the forward sections.
  You can see (right) how the strips are fairing into the stern with slight concave curvature even before we've stripped to the designed waterline. The strips are not showing this hollow curvature quite yet in the bow (left). This 15-foot model, shows a pronounced hollow even for a SLRS, partly because the boat is pretty short for a Skiff. (In fact, it is the shortest I'd recommend for fast rowing. I chose the Fry 15-footer because it is going to be the cartopper in my catalog.) So this is the 'fineness' or 'hollow' in the stern that I am asserting is a classic feature of the SLRS hull form, making the it such a slippery, fast rowboat. Two other SLRS's that I am working with, the Bobby at 20 1/2' (which was strip-built in 2012) and Clotilde at 18', are true double-enders, meaning they are symmetrical. So one end is not finer than the other, but their waterlines still show a strong hollow fore and aft. Clotilde is unique because its hull is fairly full in the ends compared to the other SLRS, which has me interested because it may be a faster boat and better in a seaway. So I plan to also model this hull and develop mold kits for Clotilde as well. Bobby mold kits are available. For the first time, the Fry Skiff is newly updated and ready to cut as a mold kit. She strips up perfectly and produces a hull that is fairer than any hand-lofted set of lines could hope to produce, I dare say. The molds receive a roundovered edge so the soft cedar is not dented. A dado is routed into the molds to make a place for squeeze clamps to hold strips in place. The stems are laminated on fore-aft molds. An alignment batten slots all the molds together in place to ensure squareness and proper spacing. The kit is $750 which includes plans package and the molds. 
Subscribe to:
Post Comments (Atom)
Full Boat Plans - Powered By Blogger
|
0 comments:
Post a Comment